From Pumpsolutions
Self-Priming Pumps - Base Mounted vertical or horizontal v-belt & direct coupled package units available.
- Duplex lift station packaged complete with controls & piping in easy access 6' x 6' Fiberglass Enclosure.
Sizes 2" through 12"
Our new self priming pump is a product manufactured using the most advanced technology. The design permits easy and fast access to inside parts, to clean up and for easy handling. This pump is totally interchangeable with several other similiar pumps.
Contents |
Maintenance - Easy & Fast
All Prime Pump normal maintenance activities can be done quickly and easily using standard hand tools - saving time and money.
Adjustment - Shim-Less External Impeller
An easy to use external impeller clearance adjustment system allows the impeller and wear plate to operate with optimum clearances without disassembly. Using only commonhand tools, the pump can be maintained at peak efficiency to extend both impeller and wear plate life.
Automatic self-Priming
The All Prime series pumps are equipped with a suction check valve but do not require the check valve to be in place to re-prime. The large volume of liquid carried in the volute allows dry suction re-priming.
Inspection and Cleaning
An advantage of the this pump is that the front clean out cover and the rotating assembly can be removed without distrubing the piping, allowing inspection and cleaning in place with little effort.
Advantages of Self Primers
Logistics
- No confined space entry required
- Pump Located outside the wet well for easier & cleaner access
- No heavy lifting equipment required for repairs
- Powered by standard Nema Motors
Maintenance
- Removable suction cover allows quick unclogging of pump
- Primary wear parts, seal, impeller & wear plate can be changed through removable suction cover
- Rotating assembly easily removed for shop repairs without distrubing piping
Design
- Rugged open impellers for solids handling to 3"
- Both speed & impeller trim can be employed to meet service conditions
- Impeller design keeps seal pressure low & reduces solids buildup in stuffing box
- Suction flapper check valve speeds re-priming and eliminates foot valves
| 
| 
| 
|
Standard Options below are dependant on model available
- Utility
- Trash
- Spa and Pool
- Centrifugal
- Cast Iron, Bronze and Stainless Steel
- 1" to 3" NPT Ports
- Built in Check valves
- Single and Three Phase ODP and TEFC Motors
- High Pressure
- Self Priming 20 - 25 feet
- Sizes from 1" to 4" NPT
- Solids Handlings