Pump Solutions #1 Corporation

Providing the best pumps, parts, motors & customer service.

6.5"-13" Impeller, 1150 RPM, JM JP & JPZ Frame

RC 1011
Request A Scot Pump Part Quote
Enclosed Impeller
Pump Image Part No. Suction X Discharge Motor HP Range Motor
Frame
Scot Motor Pump 96 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 96 6 X 5 5, 7.5, 10 JM, JP, JPZ
Scot Motor Pump 97 cast iron 6.5-13" Impeller JM/JP/JPZ frame 1150 RPM 97 8 X 6 10, 15 JM, JP, JPZ
Scot Motor Pump 267 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 267 8 X 8 7.5 JM, JP, JPZ
Scot Motor Pump 268 cast iron 6.5-13" Impeller JM/JP/JPZ frame 1150 RPM 268 12 X 10 40, 50 JM, JP, JPZ
Scot Pump model 57 cast iron JM frame 3500 RPM with 6.5 inch impeller 57 4 X 3 1, 1.5 JM, JP, JPZ
Scot Pump model 59 cast iron JM frame 3500 RPM with 6.5 inch impeller 59 6 X 5 1, 1.5, 2, 3 JM, JP, JPZ


  • 1 to 50 HP
  • 1150 RPM, 60 Hertz
  • Capacity to 4500 GPM
  • 60 Foot Head
  • 6.5" to 10.0" Max. Impeller
  • 175 PSI Max. Working Pressure
  • Type 21 mechanical seal
  • All pump cases are centerline discharge except for Pump No. 59 & 267, which are tangential discharge.
  • Pumps are flanged to connect with ANSI B16.1 125 lb. flanges.
  • Low NSPH design
  • Bronze or stainless steel shaft sleeve over carbon steel motor shaft.
  • Impeller is keyed to shaft and secured by retaining nut.
  • Replaceable wear rings
  • Gauge taps on suction and discharge.
  • Motor Voltages: 3/60/230/460, 200, 575V
  • Motor Enclosures: Open Drip Proof, TEFC, Explosion Proof

ScotFlo™ Pump Selection Software

To fully use this site, please enable Javascript