Pump Solutions #1 Corporation

Providing the best pumps, parts, motors & customer service.

6.5" Impeller - RC1042

RC 1042 Scot Pump Performance Curve for 6.5" Impeller cast iron 1750 RPM C56 & JM frame
Request A Scot Pump Part Quote
Enclosed Impeller
Pump Image Part No. Suction X Discharge Motor HP Range Motor
Frame
Scot Pump model 50 cast iron JM frame 3500 RPM with 6.5 inch impeller 50 2 X 1.5 .5, .75 C56
Scot Pump model 52 cast iron JM frame 3500 RPM with 6.5 inch impeller 52 2.5 X 2 .5, .75, 1, 1.5 C56, JM
054RC1042_small 54 3 X 2.5 .75, 1, 1.5, 2 C56, JM
054FRC1042_small 54F 2.5 X 2.5 .75, 1, 1.5, 2 C56, JM
Scot Pump model 55, 55F cast iron JM frame 3500 RPM with 6.5 inch impeller 55, 55F 3 X 3 1, 1.5, 2, 3 JM
Scot Pump model 56, 56F cast iron JM frame 3500 RPM with 6.5 inch impeller 56, 56F 3 X 3 1, 1.5, 2, 3, 5 JM
05757ERC1042_small 57, 57E 4 X 3 1.5, 2, 3, 5 JM
058RC1042_small 58 5 X 4 5 JM
Scot Pump model 59 cast iron JM frame 3500 RPM with 6.5 inch impeller 59 6 X 5 3, 5, 7.5, 10 JM


  • .50 to 10 HP
  • 1750 RPM, 60 Hertz
  • Capacity to 1000 GPM
  • 50 Foot Head
  • 6.5" Max. Impeller
  • 175 PSI Max. Working Pressure
  • Type 21 mechanical seal
  • Pump Nos. 50, 52, 54, 55 &, 56 are NPT.
  • Pump Nos. 54F, 55F, 56F, 57, 58 & 59 are flanged to connect with ANSI B16.1 125 lb. flanges.
  • Pump Nos. 57 & 58 are centerline discharge.
  • Pump No. 57E is NPT centerline discharge with ANSI flange suction.
  • Bronze or stainless steel shaft sleeve over carbon steel motor shaft.
  • Impeller is keyed to shaft and secured by retaining nut.
  • Replaceable wear rings
  • Gauge taps on suction and discharge.
  • Motor Voltages: 3/60/230/460, 200, 575V
  • Motor Enclosures: Open Drip Proof, TEFC, Explosion Proof

ScotFlo™ Pump Selection Software

To fully use this site, please enable Javascript