Pump Solutions #1 Corporation

Providing the best pumps, parts, motors & customer service.

10-13 Impeller, 1750 RPM, JP, JPZ Frame

RC 1040
Request A Scot Pump Part Quote
Enclosed Impeller
Pump Image Part No. Suction X Discharge Motor HP Range Motor
Frame
Scot Motor Pump 93 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 93 4 X 2.5 7.5, 10, 15 JP, JPZ
Scot Motor Pump 94 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 94 5 X 3 10, 15, 20 JP, JPZ
Scot Motor Pump 95 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 95 6 X 4 15, 20, 25 JP, JPZ
Scot Motor Pump 97 cast iron 6.5-13" Impeller JM/JP/JPZ frame 1150 RPM 97 8 X 6 30, 40, 50 JP, JPZ
Scot Motor Pump 267 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 267 8 X 8 15, 20, 25, 30 JP, JPZ
Scot Motor Pump 98 Cast Iron 10-13" Impeller JP/JPZ Frame 1750 RPM 268 12 X 10 100, 125, 150 JP, JPZ
096RC1040_small 96 6 X 5 15, 20, 25, 30 JP, JPZ
098RC1040_small 98 10 X 8 60, 75, 100, 125, 150 JP, JPZ


  • 7.5 to 150 HP
  • 1750 RPM, 60 Hertz
  • Capacity to 6500 GPM
  • 150 Foot Head
  • 13.3" Max. Impeller
  • 175 PSI Max. Working Pressure
  • Type 21 mechanical seal
  • Pumps are flanged to connect with ANSI B16.1 125 lb. flanges
  • All cases are center line discharge except for Pump No. 267, which is tangential discharge.
  • Bronze or stainless steel shaft sleeve over carbon steel motor shaft, except Pump Nos. 98 & 268, which have a stainless steel motor shaft.
  • Impeller is keyed to shaft and secured by retaining nut.
  • Replaceable wear rings
  • Gauge taps on suction and discharge.
  • Motor Voltages: 3/60/208-230/460, 200, 575V
  • Motor Enclosures: Open Drip Proof, TEFC, Explosion Proof

ScotFlo™ Pump Selection Software

To fully use this site, please enable Javascript